d.
Connect the other end of the fiber optic segment to an appropriate device fitted with a 1000Mbps adapter.
Check the LED indicators on the front of the Switch to ensure that the Module is operating correctly.
with the module's guide for more.
Removing the Modules
a.
Ensure that the power supply and the backbone connection cables are disconnected from the Switch.
b.
Place the Switch on a flat surface. Undo the two captive thumbscrews securing the Module into the Switch. Do not remove
any other screws from the rear of the Switch.
c.
If you are not installing another Module immediately, you must replace the blanking plate to ensure that dust and debris do
not enter the Switch, as well as to aid circulation of cooling air.
Please also check