Information At A Glance; Features; Technical Specification - Planet FGSW-2401 User Manual

Gigabit uplink switch
Table of Contents

Advertisement

appropriate bus.
The Ethernet Switch features Auto-Negotiation that ensures that all of your network connections will operate at the highest
possible transfer rate.
This Ethernet Switch is protocol independent which eliminates the need for software to install the unit or maintain your network.

Information at a Glance

The Ethernet Switch front panel display provides monitoring and diagnosis with simplicity and precision. For each port, the
LED configuration provides you with information on the status of your link activity, whether the port is operating in Full or Half
Duplex mode, collision indication and whether the port is operating at 10Mbps or 100Mbps.

Features

u
Conforms to IEEE 802.3 & 802.3u 802.3z standards
u
Interface: 24 ports 10/100Mbps N-Way Switch (using shielded RJ-45 connector)
u
Dynamic memory sharing In/Out buffer: 6Mbytes dynamic memory sharing
u
Auto-negotiation application, for per port 10/20Mbps, 100/200Mbps bandwidth, auto-detection
u
Store-and-Forward technology
u
Plug-and-Play configuration auto-learns network configuration
u
12 K MAC address table
u
Supports both half and full duplex modes
u
Supports an expansion slot in rear panel, and multiple modules optional.
2.4Gbps backplane
u
LED indicators for power, collision, 10Mbps/100Mbps per port, and activity
u
Internal switch power supply
u
Rack or desktop mountable
Technical Specifications
Standards
IEEE 802.3 10BASE-T
Compliance
IEEE 802.3u 100BASE-TX
IEEE 802.3z 1000BASE-SX/LX
ANSI/IEEE standard 802.3 N-Way auto-negotiation
Max Forwarding
14,880 pps/10BASE-T port,
Rate
148,800 pps/100BASE-TX port
148,8000 pps/1000BASE-SX/LX
Max Filtering
14,880 pps/10BASE-T port,
Rate
148,800 pps/100BASE-TX port
148,8000 pps/1000BASE-SX/LX
LED Indicators
Per Port
Link activity, Duplex mode/collision,
10/100Mbps
Per Unit Power
Network Cables 2-pair UTP Category 3, 4, 5 cable
324mm x 231mm x 44.4mm
Dimensions
(L x W x H)
Environment
0
0
Temperature 0
C to 55
temperature
Humidity 10% to 90% (Non-condensing)
Power Supply
Input rate: 100 ~ 240 (±10%) VAC Automatic adjustment,
50~60(±3) Hz
Internal universal power supply
0
0
C (32
F to 131
F) standard operating

Advertisement

Table of Contents
loading

Table of Contents