Specifications - Canon PRO-100S series Online Manual

Specifications

General Specifications
Printing resolution (dpi)
Interface
Print width
Operating environment
Storage environment
Power supply
Power consumption
External dimensions
4800* (horizontal) x 2400 (vertical)
* Ink droplets can be placed with a pitch of 1/4800 inch at minimum.
USB Port:
Hi-Speed USB *1
Direct Print Port:
PictBridge
LAN Port:
Wired LAN: 100BASE-TX / 10BASE-T
Wireless LAN: IEEE802.11n / IEEE802.11g / IEEE802.11b *2
*1 A computer that complies with Hi-Speed USB standard is required. Since
the Hi-Speed USB interface is fully upwardly compatible with USB 1.1, it can
be used at USB 1.1.
*2 Setup possible through WPS (Wi-Fi Protected Setup), WCN (Windows
Connect Now) or Cableless setup.
USB and LAN can be used at the same time.
Wireless LAN and wired LAN cannot be used at the same time.
Manual Feed Tray: 13.7 inches/348.8 mm (for Borderless Printing: 14
inches/356 mm)
Rear Tray: 12.7 inches/322.2 mm (for Borderless Printing: 13 inches/329 mm)
Temperature: 41 to 95 °F (5 to 35 °C)
Humidity: 10 to 90 % RH (no condensation)
* The performance of the printer may be reduced under certain temperature
and humidity conditions.
Recommended conditions:
Temperature: 59 to 86 °F (15 to 30 °C)
Humidity: 10 to 80 % RH (no condensation)
* For the temperature and humidity conditions of papers such as photo paper,
refer to the paper's packaging or the supplied instructions.
Temperature: 32 to 104 °F (0 to 40 °C)
Humidity: 5 to 95 % RH (no condensation)
AC 100-240 V, 50/60 Hz
Printing: Approx. 19 W *1
Standby (minimum): Approx. 2.1 W *1*2
OFF: Approx. 0.4 W
*1 Wireless LAN is active.
*2 The wait time for standby cannot be changed.
Approx. 27.2 (W) x 15.2 (D) x 8.5 (H) inches
Approx. 689 (W) x 385 (D) x 215 (H) mm
271