Replacing An Ink Tank - Canon PRO-100S series Online Manual

Replacing an Ink Tank

When remaining ink cautions or errors occur, the Alarm lamp will flash to inform you of the error. Count the
number of flashes and take appropriate action.
If an Error Occurs
Note
• If print results become faint or white streaks appear despite sufficient ink levels, see
Procedure.
• For precautionary notes on handling ink tanks, see
Replacing Procedure
When you need to replace an ink tank, follow the procedure below.
1. Make sure that the power is turned on, and open the paper output tray gently.
2. Open the top cover.
The print head holder (A) moves to the replacement position.
Caution
• Do not hold the print head holder to stop or move it forcibly. Do not touch the print head holder
until it stops completely.
Important
• Do not place any object on the top cover. It will fall into the rear tray when the top cover is
opened and cause the printer to malfunction.
• Do not touch the metallic parts or other parts inside the printer.
• If the top cover is left open for more than 10 minutes, the print head holder moves to the right.
In this case, close and reopen the top cover.
3. Remove the ink tank with the lamp flashing fast.
Push the tab (B) and lift the ink tank to remove.
Notes on ink tanks.
141
Maintenance