Cannot Print On The Disc Label - Canon PRO-100S series Online Manual

Cannot Print on the Disc Label

Disc Label Printing Does Not Start
Disc Tray Does Not Feed Properly
Disc Tray Jammed
Disc Label Printing Does Not Start
Is the disc tray placed properly?
Check1
Open the disc tray guide, properly place the disc tray again, then press the RESUME/CANCEL button on the
printer.
Use the disc tray supplied with this printer ("K" is on the upper side).
For details on how to place the disc tray, refer to
Is the printable disc placed on the disc tray?
Check2
Place the printable disc on the disc tray properly, then press the RESUME/CANCEL button.
Use the disc tray supplied with this printer ("K" is on the upper side).
For details on how to place the disc tray, refer to
If disc label printing stops before it is complete, try the operation again.
Check3
If a certain period of time has elapsed while disc label printing is in progress, the printer stops initializing.
The printer resumes initializing by pressing the RESUME/CANCEL button.
Try the operation again following the on-screen instructions.
Disc Tray Does Not Feed Properly
Is the disc tray placed properly?
Check1
Properly place the disc tray again, then press the RESUME/CANCEL button.
Use the disc tray supplied with this printer ("K" is on the upper side).
For details on how to place the disc tray, refer to
Unrecognizable printable disc may be placed.
Check2
Canon recommends that you use printable discs specially processed to be printed on by an inkjet printer.
Placing a Printable Disc.
Placing a Printable Disc.
Placing a Printable Disc.
495