Cannot Print To End Of Job - Canon PRO-100S series Online Manual

Cannot Print to End of Job

Select the setting not to compress the printing data.
Check1
If you select the setting not to compress the printing data with an application software you are using, the printing
result may be improved.
Click Print Options on the Page Setup sheet on the printer driver. Select the Do not allow application
software to compress print data check box, then click OK.
* Deselect the check box after printing is complete.
Is the size of the print data extremely large?
Check2
Click Print Options on the Page Setup sheet on the printer driver. Then, make sure Prevention of Print Data
Loss in the displayed dialog is set to On (Weak).
If the print results are not enough even though Prevention of Print Data Loss is set to On (Weak), set it to On
(Strong) and start printing again.
* When On (Strong) is selected for Prevention of Print Data Loss, print quality may be reduced.
Is the space of your computer's hard disk sufficient?
Check3
Delete unnecessary files to free disk space.
477