Canon PRO-100S series Online Manual page 144

8. Press on the top of the ink tank until the ink tank snaps firmly into place.
Make sure that the ink lamp lights up.
Important
• You cannot print if the ink tank is installed in the wrong position. Be sure to install the ink tank in
the correct position according to the label on the print head holder.
• You cannot print unless all the ink tanks are installed. Be sure to install all the ink tanks.
9. Close the top cover.
Note
• If the Alarm lamp still flashes after the top cover is closed, take appropriate action.
If an Error Occurs
• When you start printing after replacing the ink tank, the printer starts cleaning the print head
automatically. Do not perform any other operations until the printer completes the cleaning of
the print head. While cleaning is in progress, the POWER lamp is flashing.
• If the print head is out of alignment, as indicated by misaligned printed ruled lines or similar
symptoms, align the print
Notes on ink tanks
Important
• If you remove an ink tank, replace it immediately. Do not leave the printer with the ink tank removed.
• Use a new ink tank for replacement. Installing a used ink tank may cause the nozzles to clog.
Furthermore, with such an ink tank, the printer will not be able to inform you when to replace the ink
tank properly.
head.
144