Finisher Self-Test Mode - Samsung CLX-FIN40S Service Manual

4.3 Finisher Self-Test Mode

The finisher has the Self-Test mode. In this mode, you can operate the finisher without paper. Although
there is no paper, the finisher works at the same way.
4.3.1 How to use the Self-Test mode
To use the Self-Test mode, follow the below procedure.
1. Turn the machine off.
2. Set the finisher DIP switch.
3. Turn the machine on.
4. The finisher initializes and works in Self-Test mode.
Caution
Remove the staple cartridge before entering the Self-Test mode. The staples can go inside the machine.
<Removing the finisher staple cartridge>
Remove the staple cartridge before entering
the Self-Test mode.
Service Manual
CLX-FIN40S/CLX-FIN40L
4. Troubleshooting
<Removing the booklet staple cartridge>
Remove the staple cartridge before entering
the Self-Test mode.
4-37
SAMSUNG ELECTRONICS