Samsung CLX-FIN40S Service Manual page 128

● Code : H2-2775
● Symptom :
Booklet maker fault has occurred or a interface error between the booklet maker and the finisher has
occurred.
● Troubleshooting method :
1. Check if the connector P3 on the finisher main board is disconnected.
2. Check if the connector P1 on the booklet maker control board is disconnected.
3. Check the harness continuity between P3 of the finisher main board and P1 of the booklet maker control
board.
4. Check the booklet maker firmware version and upgrade it if newer version is released.
5. Replace the booklet maker control board.
6. Replace the finisher main board.
Service Manual
CLX-FIN40S/CLX-FIN40L
4. Troubleshooting
● Error message : Booklet maker Error #H2-2775. Please open/close
door.
4-23
SAMSUNG ELECTRONICS