Code: H2-2589 - Samsung CLX-FIN40S Service Manual

● Code : H2-2589
● Symptom :
Stapler head clinching motor is not working properly.
● Troubleshooting method :
Is the stapler head opened?
NO / YES 1. Replace stapler cartridge.
2. Check if the connectors of stapler head are disconnected.
3. Check if the connector P7 on the finisher main board is disconnected.
4. Check the harness continuity and replace it if required.
5. Replace the stapler head.
6. Replace the finisher main board.
Replace stapler module.
Service Manual
CLX-FIN40S/CLX-FIN40L
4. Troubleshooting
● Error message : Finisher Error #H2-2589. Please open/close door.
4-20
SAMSUNG ELECTRONICS