Samsung CLX-FIN40S Service Manual page 134

● Code : H2-3257
● Symptom :
Booklet maker input path gate does not work properly.
● Troubleshooting method :
Is the branch home sensor working? (Perform diagnostic routine 116-5620)
YES / NO 1. Check if the connector of the sensor is disconnected.
2. Check if the connector J2 on the finisher main board is disconnected.
3. Check the harness continuity and replace it if required.
4. Replace the branch home sensor .
5. Replace the booklet maker control board.
Is the branch motor working? (Perform diagnostic routine 116-0290)
YES / NO 1. Check if the connector of branch motor is disconnected.
2. Check if the connector J2 on the booklet maker control board is disconnected.
3. Check the harness continuity and replace it if required.
4. Replace the branch motor .
5. Replace the booklet maker control board.
Check if gears are broken. Replace gears if it does.
Check if input gate is broken. Replace input gate if it does.
Service Manual
CLX-FIN40S/CLX-FIN40L
4. Troubleshooting
● Error message : Booklet maker Error #H2-3257. Please open/close
door.
4-29
SAMSUNG ELECTRONICS