Lcd Display Data; Power; Rpm; Heart Rate - Schwinn MPower Echelon2 Console Owner's Manual

LCD Display Data

A1 POWER (Watts)
A2 RPM (Cadence)
A3

Heart Rate

A4 STAGE Time, Distance and Power
*Note: To change the measurement units to English Imperial or metric, refer to the User Setup section of this
manual.

Power

The power display field shows the Power in Watts that you are producing at the current
resistance level (1 horsepower = 746 Watts). Power data only shows if there is a power
sensor installed on the bike.

RPM

The RPM display field shows the current pedal revolutions per minute (RPM).
OF
Heart Rate FINE
The Heart Rate display field shows the heart rate in beats per minute (BPM) from the heart
rate monitor (HRM). When the computer is ON, it will search for a signal from a compatible
heart rate strap for 30 seconds. During this time, the HR symbol will flash. If a strap is
detected, the HR symbol will stop flashing and remain solid while displaying the HR. If
a signal is not detected after 30 seconds, the HR symbol will disappear. The user may
reinitiate the pairing process by pressing and releasing the ON/OFF button.
NOTE: The heart rate monitor is not a medical test, nor is it designed as a medical test. It
is simply a guide to target heart rate training. Please consult with your physician prior to
engaging in any strenuous physical activity. Schwinn
performance on this product, as the heart rate system performance varies based on a user's
physiology, fitness level, age, method of use, and other factors.
Features
A1
A2
A3
A4
Owner's Manual
A5
A6
A5 Cal (Calories)
A6 Gear Indicator
A7 TOTAL Time, Distance and Power
does not warrant the heart rate system
®
7
A7
CORE PART NO
XXX-XXXX
MM
I
F
E
C
A
001