Maintenance; Replacing The Console Batteries - Schwinn MPower Echelon2 Console Owner's Manual

Equipment must be regularly examined for damage and repairs. The owner is responsible to make sure
that regular maintenance is done. Worn or damaged components must be replaced immediately or the
equipment removed from service until the repair is made. Only manufacturer supplied components can
be used to maintain and repair the equipment.
This product, its packaging, and components contain chemicals known to the State of California
to cause cancer, birth defects, or reproductive harm. This notice is provided in accordance with
California's Proposition 65. If you would like additional information, please refer to our website, www.
schwinnequipment.com.
Before each use, inspect the exercise machine for loose, broken, damaged,
or worn parts. Do not use if found in this condition; repair or replace all
parts at the first sign of wear or damage. After each use, use a damp cloth
to wipe your equipment and computer free of sweat.
Important: To avoid damaging the finish on your bike and console, never
use a petroleum-based solvent when cleaning. Avoid getting excessive
moisture on the console. Replace the batteries as necessary
• Console -- (2) C batteries (LR14)

Replacing the Console Batteries

If you need to replace the batteries in the console:
• Remove the screw that attaches the end of the console bracket to the back of the console
• Remove cable protective cap
• Unplug the cable from the back of the console
• Move the console up along the console bracket to open the battery bay
• Remove the old batteries
• Put the new batteries in the console. Make sure that they point in the correct direction
(+ and -)
• Move the console down the console bracket to close the battery bay
• Plug the cable back into the console
• Attach the console to the console bracket with the screw
• Attach the cable protective cap
Contact your Distributor or Core Health & Fitness directly

Maintenance

13
Owner's Manual