Note: Follow the assembly procedure in the numerical order given.
4-1. FRONT PANEL MACHINERY
MOTOR BLOCK ASS'Y
2 stop ring
hole
concave portion
Note: When installing cam (L), adjust the hole and concave portion.
CAM (R) ASS'Y
SECTION 4
ASSEMBLY
1 cam (L)
6 washer (M)
5 gear (C)
4 gear (B)
3 gear (A)
8 two screws
(PTT2.6 × 6)
2 stop ring
Note: When installing cam (R), adjust the hole and concave portion.
7 bracket (motor) ass'y
6 washer (M)
8 screw
(B2.6 × 6)
1 cam (R)
hole
concave portion
switch
Set bracket (motor) ass'y
to be at the position in the
figure.
19