Sony XR-M500R Service Manual page 21

4-2. MECHANISM DECK
HOUSING
7 Holder the hanger by bending the claw.
5 Fit projection on C part.
1 Install the catch to the hanger.
2 Install the hanger onto
two claws of the housing.
hanger
4 Fit claw on B part.
3 Put the housing
6 Fit projection on D part.
under A part.
housing
C part
8 Hold the hanger by
bending the claw.
D part
A part
B part
ARM (SUCTION)
2 Move the arm (suction) in the arrow
direction and fit on projection.
projection
1 Fit the arm (suction) on the shaft.
21