Assembly; Assembly Of Flat Cable - Sony XAV-7W Service Manual

Note: Follow the assembly procedure in the numerical order given.
4-1.

ASSEMBLY OF FLAT CABLE

flexible retainer
3 It lets flat cables pass
in two holes of flexible retainer.
5 Pass the ground sheet (A) as
shown in a figure.
SECTION 4

ASSEMBLY

250
150
4 Two cables are turned up
in a fold portion and
stuck with a sheet (tape).
6 Bent a flexible retainer
as shown in a figure.
1 flat cable 40P
Note: Turn the point-of-contact side up, bend to
a valley type in a 250 mm portion,
and make a crease.
2 flat cable 16P
Note: Turn the point-of-contact side up, bend to
a valley type in a 150 mm portion,
and make a crease.
sheet (tape)
8 two screws
(M2 × 2.3)
7 flexible retainer
XAV-7W
9 sheet (tape)
15