Table of Contents
Advertisement
Restoring clips
Only those clips with yellow corrupt clip
markers can be restored. Clips with a red
corrupt clip indicator cannot be repaired.
Please delete such clips. If the clip cannot be
deleted, format the P2 card.
During restoration of the clips, however, the
defective-clip indicator may change from
yellow to red, resulting in inability to restore
the clips.
Turn the POWER/MODE switch to set to PB/
THUMBNAIL mode.
direction and position it on the clip you
wish to restore (clips with the yellow
they can be restored are displayed). Press
SET on the Operation lever to select the
clip.
Press the MENU button, and select
thumbnail menu.
Reconnection of incomplete clips
Turn the POWER/MODE switch to set to PB/
THUMBNAIL mode.
Use the Operation lever to select
incomplete clips to reconnect.
Press the MENU button and select
thumbnail menu.
Clips that are connected as a group must be
grouped together or they will be displayed as
incomplete clips.
Advertisement
Table of Contents
