Table of Contents
Advertisement
Recording with Variable Frame Rate (VFR) (continued)
Standard VFR recording
(pulldown recording)
In 1080i or 720P mode, set REC FORMAT on
the setting menu SYSTEM SETUP screen to
AVC-I 100/60i (60P) (or 50i, 50P).
In the SCENE FILE screen, set the menu
option VFR to ON and the menu option
FRAME RATE to suit shooting purposes.
You can also change the frame rate using
the SHTR/F.RATE dial.
Press the START/STOP button.
(
(
(
(
(
)
(
With AVC-Intra or DVCPRO HD in 1080i,
clips are recorded as 60i, 60P (50i, 50P)
with pull down information not recorded.
Audio playback is disabled when a frame
rate converter is used to extract active
frames for over and under-cranking.
Note the following about standard VFR
recording.
Pre-recording, loop recording, interval
recording, one-shot recording, and one-clip
recording are not available.
1394 output is available during recording
and recording standby, but not in AVC Intra
mode.
Changing Scene Dial position during
recording does not change VFR on and off
position.
Sound is recorded.
The screen may be distorted when
changing the FRAME RATE setting.
)
or less.
Furthermore, AGC, auto iris and ATW do not
function and must be operated manually.
Red, blue, or green points may appear on
the screen when the frame rate is low. This
is not a fault.
Advertisement
Table of Contents
