Table of Contents
Advertisement
Connections to the DVCPRO/DV connector
Control of external devices through
1394 connection
Connect a 1394 cable (DV cable).
Use the setting menu 1394 CMD SEL
(OTHER FUNCTIONS) to select the
command for terminating recording that
external devices receive.
Recording can be started and stopped
for both this unit and external devices by
pressing the START/STOP button on this
unit.
Note the following when backup recording.
External devices cannot be controlled via
1394 connection when AVC-Intra format or
DVCPRO HD native recording is selected.
Backup recording does not work in three
of the special recording modes: Interval
recording, One-shot recording and Loop
recording. (Page 44 – 46)
Please note that when performing backup
recording to a connected external device
with the time code of this unit set to REC
RUN, continuing recording when there is
no more free space on the P2 card inserted
into this unit causes the time code output
from the DVCPRO/DV terminal to halt.
Backup recording may not be performed by
external devices if you perform recording
succession.
Advertisement
Table of Contents
