Table of Contents
Advertisement
Message
Load Staples
Load Tray <x>
Menus Disabled
Network Card Busy
Network <x>
Network <x>, <y>
No DRAM Installed
No Jobs Found.
Retry?
Not Ready
Ovrflow Bin Full
Parallel <x>
Performing Self Test
What this message means
The printer is trying to staple a print
job, but the stapler is empty.
The printer is trying to feed paper from
a source it detects is empty.
The printer menus are disabled. You
cannot change the printer settings
from the operator panel.
An internal print server (also called an
internal network adapter or INA) is
being reset.
A network interface is the active
communication link.
A network interface is the active
communication link, where <x>
represents the active communication
link and <y> represents the channel.
No DRAM is installed in the printer.
The four-digit personal identification
number (PIN) you entered is not
associated with any confidential print
job.
The printer is not ready to receive or
process data. Someone pressed Stop
to take the printer offline.
The mailbox's designated overflow bin
is full.
A parallel interface is the active
communication link.
The printer is running the series of
start-up tests it performs after it is
turned on.
78
What you can do
• Install a new staple cartridge in the
stapler.
• Press Go to clear the message and
continue printing without stapling.
• Press Menu to open the Job Menu and
cancel the current job.
• Load paper of the size and type
requested in the second line of the
display in the specified tray. The printer
automatically clears the message and
continues printing the job.
• Press Menu to open the Job Menu and
cancel the current job.
See also:
Loading the trays
You can still open the Job Menu to cancel a
job that is printing or to select a confidential
job or a held job that you want to print. If
you need access to the printer menus,
contact your network administrator.
See also:
Disabling the operator panel
menus
Wait for the message to clear.
Wait for the message to clear.
Wait for the message to clear.
Turn the printer off, install DRAM and turn
the printer back on.
• Press Go to enter another PIN.
• Press Stop to clear the PIN entry
prompt.
See also:
Holding a job in the printer
Press Go to make the printer ready to
receive jobs.
Remove the stack of paper from the bin to
clear the message.
Wait for the message to clear.
Wait for the message to clear.
Advertisement
Table of Contents
