Table of Contents
Advertisement
4
Arrange the stack of paper or specialty media correctly for the size, type, and print method you are
using.
5
Place the paper or specialty media, print side up, along the left side of the multipurpose feeder,
and then push it in as far as it will easily go.
Do not force the media.
Note: Do not exceed the maximum stack height. Overfilling the feeder may cause jams.
6
Squeeze the paper guide lever and slide the guide until it
7
If you are loading a different type of media than was previously loaded in the tray, change the
Paper Type setting for that tray on the operator panel.
See
"Paper Type"
on page 60 for more information.
lightly
touches the side of the stack.
23
Advertisement
Table of Contents
