Table of Contents
Advertisement
Message
Canceling Fax
Canceling Job
Change <x>
Check <device>
Connection
Clearing Job
Accounting Stat
Close Door
Close Finisher Door
Close Tray X Door
Copying
Defragmenting
Delete All Jobs
Deleting Jobs
Disabling Menus
Disk Corrupted.
Reformat?
What this message means
The printer is processing a request to
cancel a fax job.
The printer is processing a request to
cancel the current print job.
The printer is requesting that a
different type of paper be loaded in
one of the input sources.
The specified device is either not fully
connected to the printer or is
experiencing a hardware failure.
The printer is deleting all job statistics
stored on the hard disk.
The printer front cover is open.
The finisher front door is open.
The 2000-sheet drawer is open.
The printer is processing a copy job
originating from a scanner.
The printer is defragmenting the flash
memory to reclaim storage space
occupied by deleted resources.
The printer is requesting confirmation
to delete all held jobs.
The printer is deleting one or more
held jobs.
The printer is responding to a request
to disable the menus.
The printer has attempted a disk
recovery process and cannot repair
the disk.
75
What you can do
Wait for the message to clear.
Wait for the message to clear.
See also:
Canceling a print job
Change the paper type in the specified
source.
See also:
Loading the
trays; Setup Guide
• Reestablish communication by removing
the specified device and reattaching it to
the printer.
• Press Go to clear the message and
continue printing.
• In the case of a hardware failure, turn
the printer off and back on. If the error
recurs, turn the printer off, remove the
specified device, and call for service.
Wait for the message to clear.
Close the printer front cover to clear the
message.
Close the finisher front door to clear the
message.
Close the 2000-sheet drawer to clear the
message.
Wait for the message to clear.
Wait for the message to clear.
Warning:
Do not turn the printer off while
this message is displayed.
• Press Go to continue. The printer
deletes all held jobs.
• Press Stop to cancel the operation.
Wait for the message to clear.
Wait for the message to clear.
Note: While the menus are disabled, you
cannot change the printer settings from the
operator panel.
See also:
Disabling the operator panel
menus
• Press Go to reformat the disk and delete
all files currently stored on the disk.
• Press Stop to clear the message without
reformatting the disk. The printer may
display Disk Recovery and attempt to
recover the disk.
See also:
Disk Recovery x/5 yyy%
Advertisement
Table of Contents
