Table of Contents
Advertisement
5
Place the paper against the back left corner of the tray, print side down.
Do not load bent or wrinkled paper.
Note: Do not exceed the maximum stack height. Overfilling the tray may cause jams.
6
Squeeze the front guide lever and slide the guide until it
7
Reinstall the tray.
Make sure the tray is pushed completely into the printer.
8
If you are loading a different type of media than was previously loaded in the tray, change the
Paper Type setting for that tray on the operator panel.
See
"Paper Type"
on page 60 for more information.
firmly
touches the stack of paper.
19
Advertisement
Table of Contents
