Initial Settings; Adjusting Initial Settings; Setting The Date; Setting The Clock - Pioneer DEH-P7000BT Operation Manual

Section
D (
Initial Settings
Adjusting initial settings
1
Press SRC and hold until the unit turns
off.
2
Press MULTI-CONTROL and hold until
the initial setting menu appears in the dis-
play.
3 Turn MULTI-CONTROL to select one of
the initial settings.
CLNDR (calendar)-CLOCK (clock)-
WARNING (warning tone)-AUX1 (auxiliary
input 1)-AUX2 (auxiliary input 2)-REAR SP
(rear output and subwoofer controller)-TEL
(telephone muting/attenuation)-
BUILT-IN AMP (power amp setting)-
EVERSCROLL (ever scroll)-BT AUDIO (Blue-
tooth audio)-PIN CODE INPUT (pin code
i nput)-EDIT DEVICE NAME (device name
edit)-BT INFO (Bluetooth version informa-
tion)-BT RESET:MEMORY (Bluetooth reset)
-SOFTWARE UPDATE (software update)
• You can also select the function by pressing
FUNCTION on the remote control.
• To cancel initial settings, press BAND/ESC.
(!J
Setting the date
The calender display adjusted in this mode ap-
pears when the telephone source is selected
or sources and the feature demo are off.
1 Display the initial setting menu.
Refer to Adjusting initial settings on this page.
2 Use MULTI-CONTROL to select CLNDR.
CLNDR appears in the display.
3 Push MULTI-CONTROL left or right to
select the segment of the calendar display
you wish to set.
Day-Month-Year
As you select segments of the calendar dis-
play the segment selected will blink.
@
En
)
4 Push MULTI-CONTROL up or down to
set the date.
Pushing MULTI-CONTROL up will increase
the selected day, month or year. Pushing
MULTI-CONTROL down will decrease the se-
lected day, month or year.
(!J
Setting the clock
Use these instructions to set the clock.
1 Display the initial setting menu.
Refer to Adjusting initial settings on this page.
2
Use MULTI-CONTROL to select CLOCK.
3
Push MULTI-CONTROL left or right to
select the segment of the clock display you
wish
to set.
Hour-Minute
As you select segments of the clock display,
the selected segment blinks.
4
Push MULTI-CONTROL up or down to
put a clock right.
gNote
You can match the clock to a time signal by
pressing MULTI-CONTROL.
• If 00 to 29, the minutes are rounded down.
(e.g., 10:18 becomes 10:00.)
• If 30 to 59, the minutes are rounded up. (e.g.,
10:36 becomes 11 :00.)
(!J
Switching the warning tone
If the front panel is not detached from the
head unit within four seconds of turning off
the ignition, a warning tone sounds. You can
turn off the warning tone.
1 Display the initial setting menu.
Refer to Adjusting initial settings on this page.
2 Use MULTI-CONTROL to select
WARNING.