Tuner; Basic Operations; Storing And Recalling Broadcast Frequencies; Introduction To Advanced Operations - Pioneer DEH-P7000BT Operation Manual

Section
C_o_p_e_ra_t_i"_9_t_h_iS_u_"_it ) •
Tuner
Basic Operations
• Select a band
Press BAND/ESC.
•
Band can be selected from among FMl, FM2,
FM30rAM.
• Manual tuning (step by step)
Push MULTI-CONTROL left or right.
• Seek tuning
Push and hold MULTI-CONTROL left or right,
and then release.
• You can cancel seek tuning by pushing
MULTI-CONTROL left or right.
•
While pushing and holding MULTI-CONTROL
left or right, you can skip stations. Seek tuning
starts as soon as you release MULTI-CONTROl.
Storing and recalling broadcast
frequencies
You can easily store up to six broadcast fre-
quencies for later recall.
• Six stations for each band can be stored in
memory,
1 Press LIST.
Preset screen is displayed.
2 Use MULTI-CONTROL to store the se-
lected frequency in memory.
Turn to change the preset number. Press and
hold to store.
3 Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station. Press to select.
• You can also change the station by pushing
MULTI-CONTROL up or down.
• To return to the ordinary display, press
BAND/ESC or LIST.
• If you do not operate the list within about 30
seconds, the display automatically returns to the
ordinary display.
Using the remote control
• When you find a frequency that you
want to store in memory, press one of pre-
set tuning buttons 1 to 6 and hold until the
preset number stops flashing.
The number you have pressed will flash in the
preset number indicator and then remain lit.
The selected radio station frequency has been
stored in memory.
The next time you press the same preset tun-
ing button the radio station frequency is re-
called from memory.
• You can also recall radio station frequencies
assigned to preset tuning numbers by pushing
MULTI-CONTROL up or down during the fre-
quency display.
Introduction to advanced
operations
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option. Press to se-
lect.
The function menu is displayed.
3 Turn MULTI-CONTROL to select the
function.
BSM (best stations memory)-LOCAL (local
seek tuning)
• Notes
• You can also select the function by pressing
FUNCTION on the remote control.
• To return to the ordinary display, press
BAND/ESC.
Storing the strongest broadcast
frequencies
SSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies.
En
®