Selecting The Sirius Channel Select; Using The Game Alert Function - Pioneer DEH-P7000BT Operation Manual

Section
• ( Available accessories
a
Notes
• You can also select the function by pressing
FUNCTION on the remote control.
• To return to the ordinary display, press
BAND/ESC.
• If you do not operate functions within about
30 seconds, the display is automatically re-
turned to the ordinary display.
• During the Instant Replay mode, you can se-
lect PAUSE (pause). Refer to
Using Instant Re-
play function
on the next page.
• PAUSE is the same as that of the built-in CD
player. (Refer to
Pausing playback
on page 19.)
Selecting the SIRIUS channel
seledmode
You have two methods for selecting a channel:
by number and by category. When selecting
by number, channels in any category can be
selected. Select by category to narrow your
search down to only channels in a particular
category.
• Press SAT MODE repeatedly to select
the desired channel select setting.
CH NUMBER (channel number select setting)
-CATEGORY (channel category select
setting)
a
Note
You can also perform this operation in the menu
that appears by using MULTI-CONTROL.
Selecting a channel in the channel
category
1 Select the channel select settings to
CATEGORY.
Refer to
Selecting the SIRIUS channel select
mode
on this page.
2 Push MULTI-CONTROL up or down to
select the desired channel category.
®
En
)
3 Push MULTI-CONTROL left or right to
select the desired channel in the selected
channel category.
Using the Game Alert fundion
Only when SIR-PNR2/SIR-PNR2C is connected
to this unit, you can operate this function.
This system can alert you when games invol-
ving your favorite teams are about to start. To
use this function you need in advance to set
up a game alert for the teams.
Selecting teams for Game Alert
1 Display the function selection menu.
Refer to
Introduction of advanced operations
on
the previous page.
2 Use MULTI-CONTROL to select
TEAM SETTING in the function menu.
3 Push MULTI-CONTROL left or right to
select a desired league.
League names are switched in the display.
4 Push MULTI-CONTROL up or down to
select a desired team.
Teams in the selected category are switched in
the display.
S Press MULTI-CONTROL to store the se-
lected team in memory.
The game alert function will start on that
team.
• To turn the Game Alert off of the selected
team, press MULTI-CONTROL again.
• When you have al ready made 12 team selec-
tions, FULL is displayed and additional team se-
lection is not possible. In this case, first delete
the team selection and then try again.
6 Repeat these steps for selecting other
teams.
Up to 12 teams can be selected.