Attaching The Front Panel; Resetting The Microprocessor; Use And Care Of The Remote Control; Installing The Battery - Pioneer DEH-P7000BT Operation Manual

Section
(_B_e_fo_r_e_~_o_U_S_ta_rt ~)
. .
3 Put the front panel into the provided
protective case for safe keeping.
Attaching the front panel
• Reattach the front panel by holding it
upright to the unit and clipping it securely
into the mounting hooks.
Resetting the microprocessor
The microprocessor must be reset under the
following conditions:
• Prior to using this unit for the first time
after installation
• If the unit fails to operate properly
• When strange or incorrect messages ap-
pear on the display
• Press RESET with a pen tip or other
pointed instrument.
RESET button
[!)
Use and care of the remote
control
Installing the battery
Slide the tray on the back of the remote con-
trol out and insert the battery with the plus (+)
and minus (-) poles aligned properly.
• When using for the first time, pullout the
film protruding from the tray.
A
WARNING
Keep the battery out of the reach of children.
Should the battery be swallowed, consult a doc-
tor immediately.
A
CAUTION
• Use one CR202S (3
V)
lithium battery.
• Remove the battery if the remote control is not
used for a month or longer.
• There is a danger of explosion if the battery is
incorrectly replaced. Replace only with the
same or equivalent type.
• Do not handle the battery with metallic tools.
• Do not store the battery with metallic objects.
En
CD