Disconnecting A Bluetooth Audio Player; Operating The Unit - Pioneer DEH-P7000BT Operation Manual

Section
D (
Operating this unit
Using a Bluetooth audio player to
initiate a connection
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select
CONNECTION.
Turn to change the menu option, Press to se-
lect,
• You can also select this menu by pressing and
holding
PHONE/~/CONNECT
on the ordinary
display.
3 Turn MULTI-CONTROL to select
BT AUDIO DEVICE.
• If there is previous connection log in this unit,
you can select the Bluetooth device from
PAIRED DEVICE.
Refer to Connecting a paired Bluetooth audio
player.
4 Use MULTI-CONTROL to select a group.
Push
MULTI-CONTROL
up or down to select a
group.
NOKIA (Nokia)-STANDARD (standard)
• Normally select
STANDARD. If the device of
Nokia is not paired to this unit, select NOKIA.
• Push MULTI-CONTROL left or right to display
a group name or an 10,
5 Press MULTI-CONTROL to open the con-
nection.
READY
will be displayed,
• This unit is now on standby for connection
from Bluetooth audio player,
• Push MULTI-CONTROL left or right to display
the device name, BO address and PIN code of
this unit.
6 Use your Bluetooth audio player to es-
tablish connection.
PIN code is set to
0000
as the default. You can
change this code in the initial setting, Refer to
Entering PIN code for Bluetooth wireless con-
nection on page 48.
While connecting, CONNECTING is displayed,
If the connection is established,
CONNECTED
is displayed,
@
En
)
Connecting a paired Bluetooth audio
player
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select
CONNECTION.
Turn to change the menu option, Press to se-
lect,
3 Turn MULTI-CONTROL to select
PAIRED DEVICE.
Paired device name will be displayed,
• Push MULTI-CONTROL left or right to switch
the device name, BO address, group name and
group 10.
4 Press MULTI-CONTROL to establish con-
nection.
• While connecting,
CONNECTING flashes, If
the connection is established,
CONNECTED is
displayed.
• If the connection fails, ERROR is displayed. In
this case, try again from the beginning.
Disconnecting a Bluetooth
audio player
This function can be operated only when the
Bluetooth wireless connection is being estab-
lished.
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select
CONNECTION.
Turn to change the menu option. Press to se-
lect.
3 Turn MULTI-CONTROL to select
DISCONNECT AUDIO.
4 Press MULTI-CONTROL to disconnect
the Bluetooth wireless connection.