Function And Operation; Connecting A Bluetooth Audio Player; Playing Songs On Bluetooth Audio Player; Stopping Playback - Pioneer DEH-P3000IB Operation Manual

Section
• ( Available accessories
Function and operation
1 Press MULTI-CONTROL to display the
main menu.
2
Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option. Press to se-
lect.
3
Turn MULTI-CONTROL to select the
function.
CONNECTION OPEN (connection open)-
DISCONNECT AUDIO (disconnect audio)-
PLAY (Play)-STOP (Stop)-PAUSE (pause)-
DEVICE INFO (device information)
• PAUSE is the same as that of the built-in CD
player. (Refer to Pausing playback on page 16.)
• You can also perform the same operations by
pushing
MULTI-CONTROL
up or down.
• Notes
• You can also select the function by pressing
FUNCTION on the remote control.
• To return to the previous display, press
BACK.
• To return to the main menu, press and hold
BACK.
• To return to the ordinary display, press
BAND.
• If a Bluetooth audio player is not connected to
this unit yet, CONNECTION OPEN and
DEVICE INFO
appear in the function menu
and other functions are not available.
• If a Bluetooth audio player is connected via
higher level, CONNECTION OPEN does not
appear in the function menu and the other
functions are available.
• If a Bluetooth audio player is connected via
lower level, only
DISCONNECT AUDIO
and
DEVICE INFO appear in the function menu.
• If you do not operate functions other than
CONNECTION OPEN and
DISCONNECT AUDIO within about 30 sec-
onds, the dispray is automatically returned to
the ordinary display.
(ill
En
)
Connecting a Bluetooth audio
player
1 Use MULTI-CONTROL to select
CONNECTION OPEN in the function menu.
2
Press MULTI-CONTROL to open the con-
nection.
ALWAYS WAITING is displayed. This unit is
now on standby for connection from Bluetooth
aud io player.
If your Bluetooth audio player is set ready for
Bluetooth wireless connection, connection to
this unitis automatically established.
• Note
Before you can use audio players you may need
to enter the PIN code into this unit. If your player
requires a PIN code to establish a connection,
look for the code on the player or in its accompa-
nying documentation. Refer to Entering PIN code
for Bluetooth wireless connection on page 27.
Playing songs on Bluetooth
audio player
1 Use MULTI-CONTROL to select PLAY in
the function menu.
2
Press MULTI-CONTROL to start play-
back.
Stopping playback
1 Use MULTI-CONTROL to select STOP in
the function menu.
2
Press MULTI-CONTROL to stop the play-
back.
Disconnecting a Bluetooth
audio player
1 Use MULTI-CONTROL to select
DISCONNECT AUDIO in the function menu.