Lighting Burner - Monessen Hearth Natural Vent Gas Fireplace BBV400 Installation And Operating Instructions Manual

OPERATING INSTRUCTIONS
MAIN BURNER SWITCH
The "ON/OFF" switch for the main burner can be found behind door of the fire-
place. This switch allows you to turn on and to turn off the main burner without
using the gas valve knob. Make sure the button is in the "ON" position to light
the main burner. See Figure 24.
LIGHTING THE BURNER
Depress and turn the knob counterclockwise
Figure 25. It will take less than four (4) seconds for the burner to ignite.
PILOT POSITION
Depress and turn knob to pilot position to keep burner off while maintaining the
pilot light. See Figure 26.
Depress and turn knob clockwise
26

LIGHTING BURNER

to the "ON" position. See
P I L
O T
Figure 26 - Pilot Position
TO TURN OFF GAS
to "OFF" position. See Figure 27.
P I L
O T
Figure 27 - Off Position
Figure 24 -
On/Off/RS Switch
P I L
O T
Figure 25 - On Position
62D4036
50