OPERATING INSTRUCTIONS
MAIN BURNER SWITCH
The "ON/OFF/RS" switch for the main burner can be found behind door of the
fireplace. This switch allows you to turn on and to turn off the main burner without
using the gas valve knob. Make sure the button is in the "ON" position to light
the main burner. See Figure 42.
LIGHTING THE BURNER
Depress and turn the knob counterclockwise
Figure 43. It will take less than four (4) seconds for the burner to ignite.
PILOT POSITION
Depress and turn knob to pilot position to keep burner off while maintaining the
pilot light. See Figure 44.
Depress and turn knob clockwise
34
LIGHTING BURNER
to the "ON" position. See
� � �
� �
Figure 44 - Pilot Position
TO TURN OFF GAS
to "OFF" position. See Figure 45.
� � �
� �
Figure 45 - Off Position
Figure 42 -
On/Off/RS Switch
� � �
� �
Figure 43 - On Position
54D0108
T