Lighting Burner; Lighting Electronic Ign; To Turn Off Gas - Monessen Hearth SDV500 Installation And Operating Instructions Manual

Table of Contents

Advertisement

OPERATING INSTRUCTIONS

LIGHTING BURNER

50
MAIN BURNER SWITCH
The "ON/OFF" switch for the main burner can be found behind door of the fire-
place. This switch allows you to turn on and to turn off the main burner without
using the gas valve knob. Make sure the button is in the "ON" position to light
the main burner. See Figure 53.
LIGHTING THE BURNER
Figure 53 -
Depress and turn the knob counterclockwise
to the "ON" position. See
On/Off/RS Switch
Figure 54. It will take less than four (4) seconds for the burner to ignite.
PILOT POSITION
Depress and turn knob to pilot position to keep burner off while maintaining the
pilot light. See Figure 55.
Figure 54 - On Position
Figure 55 - Pilot Position

TO TURN OFF GAS

Depress and turn knob clockwise
to "OFF" position. See Figure 56.
Figure 67 - Off Position
56D0106
41

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sdv600

Table of Contents