Designer Series Gas Fireplaces
MaIN BuRNER SwITCh
The "ON/OFF/RS" switch for the main burner can be found
behind door of the fireplace. This switch allows you to turn on
and to turn off the main burner without using the gas valve
knob. Make sure the button is in the "ON" position to light the
main burner.
LIGhTING ThE BuRNER
Depress and turn the knob counterclockwise
position. It will take less than four (4) seconds for the burner to
ignite.
PILoT PoSITIoN
Depress and turn knob to pilot position to keep burner off while
maintaining the pilot light.
Depress and turn knob clockwise
34
LIGhTING BuRNER
Pilot Position
P I L
To TuRN oFF GaS
FP1935
to "OFF" position.
control knob pilot
P I L
Off Position
O T
oPERaTING INSTRuCTIoNS
to the "ON"
On Position
O T
On/Off/RS Switch
P I L
O T
FP1937
control knob on
42D0200