Cabling The Server - IBM eServer 232 xSeries Installation Manual

Cabling the server

e r C a b l i n g t h e s e r v The following illustration shows the input/output connectors and cable routing for the
server.
Note: The illustrations in this document might differ slightly from your hardware.
Universal serial bus
(USB) 1 and 2
Additionally, for rack models, be sure to route the cables through the cable-
management assembly on the rack (see page 20).
Note: The system management Serial C port and the ISM ports are dedicated for
Serial A
Serial B
Mouse
Keyboard
Ethernet
ISM-A and B
Serial C
Video
use by the system management subsystem.
Cable-restraint
bracket
Chapter 2. Installing Options
19