Important Safety Instructions; Technical Data; Environment - Yale Doorman User Manual

Important safety instructions

Read these safety instruction to avoid accident, damage and
inconvenience
• Never disassemble the product parts. This can cause electronic
shock and product damage.
• Do not use water or solvent such as gasoline of benzene since
this can damage electronics and surface of product.
• This product uses 4 1,5V alkaline batteries.
• Exchange all 4 batteries at low battery indication. Never drain the
batteries since this can damage the product.
• Battery warning:
– Always check that + and – poles are turned the right direction
when exchanging batteries.
– Use only alkaline batteries.
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries accoding to the national code or
recycling program.

Environment

Envirronmental declaration can be optained from supplier.

Technical data

Maximum number of key tags are 10 on one lock.
Each key tag can be registered on maxiumum 6 locks.
Maximum number of user codes are 10 on one lock.
Maximum number of remote controls are 5 on one lock.
Surface finish: Silver spray with UV coating
Sutabile for outdoor use, IP55 approved
Temperature range: Inside 0 to +50 degrees and outside -25
to +70 degrees Celsius.
Intruder alarm goes off if the door is opened without unlocking
and if someone tries to manipulate the electronics.
Do not use any strong cleaning products such as bleach etc.
!
to clean the Yale Doorman. It can damage the surface and
electronics of the product.
47