Sinclair SYMPHONY MS-H09AISW PT Service Manual page 12

ON/OFF button
1
+/- button
2
MODE button
3
Each time you press this button , a mode is selected in a sequence that goes from AUTO,COOL, DRY, FAN, and HEAT * , as the
FAN button
4
following:
SWING button
5
I FEEL button
6
button
/
7
ON/OFF button
1
After energization, AUTO mode is defaulted. In AUTO mode, the set temperature will not be displayed on the LCD, and the unit
SLEEP button
8
+/- button
will automatically select the suitable operation mode in accordance with the room temperature to make indoor room comfortable.(As
2
TEMP button
9
for cooling only unit,it won't have any action when it receives the signal of heating operation.)
MODE button
3
QUIET button
10
FAN button
4
ClOCK button
11
SWING button
This button is used for setting Fan Speed in the sequence that goes from AUTO,
5
T-ON T-OFF button / ,
to Auto.
12
I FEEL button
6
ON/OFF button
1
TURBO button
Auto
13
/ button
7
+/- button
2
X-FAN button
14
Low speed
SLEEP button
8 MODE button
3
LIGHT button
15
TEMP button
FAN button
9
4
SWING button QUIET button
10 5
Press this button to set up &down swing angle, which circularly changes as below: I FEEL button
ClOCK button
6
11
/ button
7 T-ON T-OFF button /
12
TURBO button SLEEP button
8
13
ON/OFF button
1
X-FAN button
TEMP button
14 9
+/- button
2
LIGHT button
QUIET button
15 This remote controller is universal. If any command
10
MODE button
3
ON/OFF button
indicates the guide louver swings as:
1
ClOCK button
11
FAN button
4
+/- button
2
T-ON T-OFF button /
12
SWING button
5
MODE button
3
TURBO button
13
I FEEL button
6
FAN button
4
X-FAN button
14
Press this button to turn on I FEEL function. The unit automatically adjust temperature according to the sensed temperature.
button
/
7
SWING button
5
LIGHT button
Press this button again to cancel I FEEL function.
15
ON/OFF button
SLEEP button
1
8
I FEEL button
6
+/- button
TEMP button
9 2
button
/ (Only applicable for some models)
7
MODE button
QUIET button
3
10
SLEEP button
8
Press this button to achieve the on and off of healthy and scavenging functions in operation status. Press this button for the
FAN button
4
ClOCK button
11
TEMP button
first time to start scavenging function; LCD displays "
9
SWING button
5
/
functions simultaneously; LCD displays " T-ON T-OFF button
12
QUIET button
10
I FEEL button
6
functions simultaneously. Press the button for the fourth time to start healthy function; LCD display "
TURBO button
13
ClOCK button
11
to repeat the operation above.Air function is applicable for some models.
/ button
7
X-FAN button
14
/
T-ON T-OFF button
12
SLEEP button
8
LIGHT button
15
TURBO button
13
Press this button, can select Sleep 1 (
TEMP button
9
X-FAN button
14
electrified, Sleep Cancel is defaulted.
QUIET button
10
LIGHT button
Sleep 1 is Sleep mode 1, in Cool mode: after run for one hour in sleep mode, the main unit setting temperature will increase 1℃ ,
15
ClOCK button
11
after 2 hours, the setting temperature will increase 2 ℃ , but the maximal setting temperature is 30 ℃ , then the unit will run at
this setting temperature all along; In Heat mode: after run for one hour in sleep mode, the setting temperature will decrease 1 ℃
T-ON T-OFF button /
12
after 2 hours the setting temperature will decrease 2℃ , but the minimal setting temperature is 16℃ , then the unit will run at this
TURBO button
13
setting temperature all along.
X-FAN button
14
Sleep 2 is sleep mode 2, that is air conditioner will run according to the presetting a group of sleep temperature curve.
LIGHT button
15 Sleep 3- the sleep curve setting under Sleep mode by DIY:
*Note:Only for models with heating function.
,
, ,
Auto
Low speed Low-Medium speed
Low-Medium speed
Medium-High speed
Medium-High speed
,
". Press the button for the second time to start healthy and scavenging
" and " ". Press this button for the third time to quit healthy and scavenging
), Sleep 2 (
,
Medium speed
Medium speed
High speed
High speed
or is sent out, the unit will carry out the command as
),Sleep 3 ( ) and cancel the Sleep,circulate between these, after
, ,
, , to
Auto
Low speed
Medium-High speed
". Press this button again
,
then back
Low-Medium speed
12