Advertisement

DN:KD-5917-SMSY01 V3.0
Fully Automatic Arm Cuff Blood Pressure Monitor
__________________________________________________________________________
IMPORTANT INFORMATION ......................................................................... 2
CONTENTS AND DISPLAY INDICATORS ..................................................... 2
INTENDED USE .............................................................................................. 3
CONTRAINDICATION ..................................................................................... 3
PRODUCT DESCRIPTION .............................................................................. 3
SPECIFICATIONS ........................................................................................... 4
NOTICE ........................................................................................................... 4
SETUP AND OPERATING PROCEDURES .................................................... 6
1.
BATTERY LOADING ............................................................................... 6
2.
CLOCK AND DATE ADJUSTMENT ........................................................ 6
3.
CONNECTING THE CUFF TO THE MONITOR ....................................... 7
4.
APPLYING THE CUFF ............................................................................. 7
5.
BODY POSTURE DURING MEASUREMENT ......................................... 7
6.
TAKING YOUR BLOOD PRESSURE READING ..................................... 8
7.
DISPLAYING STORED RESULTS .......................................................... 8
8.
DELETING MEASUREMENTS FROM THE MEMORY ........................... 9
9.
ASSESSING HIGH BLOOD PRESSURE FOR ADULTS ........................ 9
10.
TROUBLESHOOTING (1) .................................................................. 10
11.
TROUBLESHOOTING (2) .................................................................. 10
MAINTENANCE ............................................................................................ 11
EXPLANATION OF SYMBOLS ON UNIT ..................................................... 11
WARRANTY INFORMATION ........................................................................ 12
SERVICE CENTER ....................................................................................... 12
ELECTROMAGNETIC COMPATIBILITY INFORMATION ............................ 12
MODEL KD-5917
(ELECTRONIC SPHYGMOMANOMETER)
OPERATION GUIDE
INDEX
1/15
Operation Guide
Template version:1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KD-5917 and is the answer not in the manual?

Questions and answers

Summary of Contents for Andon KD-5917

  • Page 1: Table Of Contents

    DN:KD-5917-SMSY01 V3.0 Operation Guide MODEL KD-5917 Fully Automatic Arm Cuff Blood Pressure Monitor (ELECTRONIC SPHYGMOMANOMETER) OPERATION GUIDE __________________________________________________________________________ INDEX IMPORTANT INFORMATION ................. 2 CONTENTS AND DISPLAY INDICATORS ............. 2 INTENDED USE ....................3 CONTRAINDICATION ..................3 PRODUCT DESCRIPTION ................3 SPECIFICATIONS ...................
  • Page 2: Important Information

    DN:KD-5917-SMSY01 V3.0 Operation Guide IMPORTANT INFORMATION NORMAL BLOOD PRESSURE FLUCTUATION All physical activity, excitement, stress, eating, drinking, smoking, body posture and many other activities or factors (including taking a blood pressure measurement) will influence blood pressure value. Because of this, it is mostly unusual to obtain identical multiple blood pressure readings.
  • Page 3: Intended Use

    DN:KD-5917-SMSY01 V3.0 Operation Guide INTENDED USE Fully Automatic Blood Pressure Monitor is for use by medical professionals or at home and is a non-invasive blood pressure measurement system intended to measure the diastolic and systolic blood pressures and pulse rate of an adult individual by using a non-invasive technique in which an inflatable cuff is wrapped around the upper arm.
  • Page 4: Specifications

    DN:KD-5917-SMSY01 V3.0 Operation Guide SPECIFICATIONS 1. Product name: Blood Pressure Monitor 2. Model: KD-5917 3. Classification: Internally powered, Type BF applied part,IPX0,No AP or APG,Continuous operation 4. Machine size: approx. 125mm×130mm×62mm (4 15/16″ x 5 1/8″ x 2 7/16″) 5. Cuff circumference: 22cm-30cm(8 21/32″ -11 13/16″), 30cm-42cm(11 13/16″ -16 17/32″) (Optional), 42cm-48cm(16 17/32″...
  • Page 5 DN:KD-5917-SMSY01 V3.0 Operation Guide 7. Consult your physician if you have any doubt about below cases: 1) The application of the cuff over a wound or inflammation diseases; 2) The application of the cuff on any limb where intravascular access or therapy, or an arterio-venous (A-V) shunt, is present;...
  • Page 6: Setup And Operating Procedures

    DN:KD-5917-SMSY01 V3.0 Operation Guide measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.
  • Page 7: Connecting The Cuff To The Monitor

    DN:KD-5917-SMSY01 V3.0 Operation Guide c. You can turn off the monitor by pressing “START” button when the minute is blinking, then the time and date is confirmed. d. The monitor will turn off automatically after 1 minute of no operation with the time and date unchanged.
  • Page 8: Taking Your Blood Pressure Reading

    DN:KD-5917-SMSY01 V3.0 Operation Guide Sitting Comfortably Measurement a. Be seated with your feet flat on the floor, and don’t cross your legs. b. Place palm upside in front of you on a flat surface such as a desk or table The middle of the cuff should be at the level of the right atrium of the heart.
  • Page 9: Deleting Measurements From The Memory

    DN:KD-5917-SMSY01 V3.0 Operation Guide will blink at the same time. Press “MEM” button repeatedly to review the results measured previously. b. When displaying the stored results, the monitor will turn off automatically after 2 minutes of no operation. You can also press the button “START”...
  • Page 10: Troubleshooting (1)

    DN:KD-5917-SMSY01 V3.0 Operation Guide 10. TROUBLESHOOTING (1) PROBLEM POSSIBLE CAUSE SOLUTION LCD Display shows Low Battery Change all the batteries battery symbol Arm or blood pressure Re-test taking care to not monitor was moved move your arm or the during testing...
  • Page 11: Maintenance

    DN:KD-5917-SMSY01 V3.0 Operation Guide MAINTENANCE Do not drop this monitor or subject it to strong impact. Avoid high temperature and solarization. Do not immerse the monitor in water as this will result in damage to the monitor. If this monitor is stored near freezing, allow it to acclimate to room temperature before use.
  • Page 12: Warranty Information

    For all ME EQUIPMENT and ME SYSTEMS Guidance and manufacture’s declaration - electromagnetic emissions The KD-5917 is intended for use in the electromagnetic environment specified below. The customer or the user of the KD-5917 should assure that it is used in such an environment. Emissions test...
  • Page 13 Guidance and manufacturer’s declaration - electromagnetic immunity The KD-5917 is intended for use in the electromagnetic environment specified below. The customer or the user of the KD-5917 should assure that it is used in such an environment. Electromagnetic IMMUNITY test...
  • Page 14 RF transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the KD-5917 is used exceeds the applicable RF compliance level above, the KD-5917 should be observed to verify normal operation.
  • Page 15 Operation Guide portable and mobile RF communications equipment and the KD-5917 The KD-5917 is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the KD-5917 can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the KD-5917 as recommended below, according to the maximum output power of the communications equipment.

Table of Contents