Bearings And Oil Seals; Circlips - Yamaha YZF-R6(V) 2006 Service Manual

Hide thumbs Also See for YZF-R6(V) 2006:

Table of Contents

IMPORTANT INFORMATION

BEARINGS AND OIL SEALS

Install bearings "1" and oil seals "2" so that the

manufacturer's marks or numbers are visible.

When installing oil seals, lubricate the oil seal

lips with a light coat of lithium-soap-based

grease. Oil bearings liberally when installing, if

appropriate.

Do not spin the bearing with compressed air

because this will damage the bearing surfac-

Before reassembly, check all circlips carefully

and replace damaged or distorted circlips. Al-

ways replace piston pin clips after one use.

When installing a circlip "1", make sure the

sharp-edged corner "2" is positioned opposite

the thrust "3" that the circlip receives.

Table of Contents