Yamaha YZF-R6(V) 2006 Service Manual page 193

2. Install:
• Lower ring nut "1"
• Rubber washer "2"
• Upper ring nut "3"
• Lock washer "4"
Refer to "CHECKING AND ADJUSTING
THE STEERING HEAD" on page 3-26.
3. Install:
• Upper bracket
• Steering stem nut
• Right handlebar assembly
• Left handlebar assembly
NOTE:
Temporarily tighten the steering stem nut and
handlebar bolts.
4. Install:
• Front fork legs
Refer to "FRONT FORK" on page 4-44.
NOTE:
Temporarily tighten the lower bracket pinch
bolts.
5. Tighten:
• Steering stem nut
Steering stem nut
115 Nm (11.5 m·kg, 85 ft·lb)
6. Install:
• Front brake hose joint bracket "1"
Front brake hose joint bracket
bolt
10 Nm (1.0 m·kg, 7.2 ft·lb)
• Lower bracket cover "2"
Lower bracket cover bolt
7 Nm (0.7 m·kg, 5.1 ft·lb)
• Front brake hose joint "3"
Front brake hose joint bolt
10 Nm (1.0 m·kg, 7.2 ft·lb)
NOTE:
Make sure that the tab "a" on the front brake
hose joint bracket contacts the side "b" of the
front brake hose joint.
1
3
7. Check:
• Cable routing
NOTE:
Make sure the immobilizer unit lead, main switch
lead, brake hoses, throttle cables, clutch cable,
and handlebar switch leads are routed properly.
Refer to "CABLE ROUTING" on page 2-47.
4-58
STEERING HEAD
a
b
2