Ir Remote Control; Typical Application - Binary B-200-AVDMATRIX-8X8 Owner's Manual

IR REMOTE CONTROL

1. DISCRETE POWER ON
2. DISCRETE POWER OFF
3. DESTINATION: OUTPUTS 1-8
4. SOURCE: INPUTS 1-8
This remote provides discrete Power
On and Off as well as discrete source
selection. Switching commands must
be sent in 2 strings (Output – Input).
To make a selection:
1. Be sure the unit is on by pushing the
ON button
2. Press the button for the desired output
from DESTINATION choices 1-8.
3. Press the button for the desired input,
from SOURCE choices 1-8.
Example:
If you want to see Input 4 on Output 5,
first press "5" in the DESTINATION section,
then press "4" in the SOURCE section.

TYPICAL APPLICATION

8 Component sources to 8 Component Output Matrix Switcher
(DVD Players and TV's shown - a variety of components can be used including,
but not limited to: Projectors, TVs, Blu-Ray Players, Cable boxes, Satellite, etc...)
1 2
POWER
ON
OUTPUT 1 OUTPUT 2 OUTPUT 3 OUTPUT 4
OUTPUT 5 OUTPUT 6 OUTPUT 7 OUTPUT 8
DESTINATION
SOURCE
INPUT 1I NPUT 5
INPUT 2I NPUT 6
INPUT 3I NPUT 7
INPUT 4I NPUT 8
D V
D
D V
D
D V D V
D D
D V
D V
D D
D V
D
D V
D
OFF
3
4