Decimal Places - Monarch 9406 Operator's Handbook Manual

Decimal Places

You can set the printer for 0, 1, 2, or 3 places after the decimal
in a price field. In U.S. currency, you might print prices like this
$24.00 (2 decimal places)
or like this...
$24 (0 decimal places)
The default setting for Decimal Places is 2. To change the
setting, follow the steps listed under "Finding Default Options."
Then follow the steps below.
R
1. Press until you see
E
2. Press . You will see the previous setting, for example,
R
E
3. Press or
press . You will see
Q
4. Press to exit to the Setup Menu.
Q
5. Press to exit to the Main Menu.
NOTE: After changing settings in the Setup Menu, always
return to the Main Menu before turning your
printer off. The printer will not save changes to
these menus if you turn it off before returning to
the Main Menu.
DEFAULTS
< Decimal Places
DECIMAL PLACES
< 2
L
until you see the option you want. Then
DEFAULTS
< Decimal Places
6. Setting Defaults
>
6-5