Supply Type - Monarch 9406 Operator's Handbook Manual

Q
3. Press to exit to the Setup menu.
NOTE: If you set the Ribbon option to Yes, be sure you
install a ribbon before printing.
Q
4. Press to exit to the Main Menu.
NOTE: After changing settings in the Setup Menu, always
return to the Main Menu before turning your
printer off. The printer will not save changes to
these menus if you turn it off before returning to
the Main Menu.

Supply Type

You can use indexed or non-indexed supplies with the 9406
printer. These supplies are defined as follows:
Indexed supplies have marks to indicate the specific
length of each label. Supplies with an aperture or black
mark are indexed supplies.
Non-indexed supplies have no marks to indicate the
specific length of the label.
The default setting for Supply Type is Indexed. To change the
setting, follow steps listed under "Finding the Supply Options."
Then follow the steps below.
R
1. Press until you see
E
2. Press . You will see the previous setting, for example,
SUPPLY
< Supply Type
SUPPLY TYPE
< Indexed
3. Setting Supply Options
>
3-3