Monarch 9406 Operator's Handbook Manual page 34

9406 Operator's Handbook
E
2. Press
3. You can:
press
return to the Port Setting menu.
press
You will see
Q
4. Press
Q
5. Press
NOTE: After changing settings in the Setup Menu, always
return to the Main Menu before turning your
printer off. The printer will not save changes to
these menus if you turn it off before returning to
the Main Menu.
6. Verify that the default settings are correct by printing Test
Label 2 (the current communication parameters appear on
the label). See "Printing a Test Label" in Read This First .
4-8
. You will see
Are you sure?
Q
to exit without changing the values. You will
R E
and then
PORT SETTINGS
<
to exit to the Setup menu.
to exit to the Main Menu.
No
to set the values to the defaults.
Reset
>