Programmable Functions; Water Plus System - Miele Softtronic W 418 Operating Instructions Manual

Programmable functions

The programmable functions can be
used to tailor washing programmes to
suit your individual requirements.

Water plus system

Selecting the Water plus additional
option increases the water intake in
the programmes listed below.
The water intake is increased in the
wash and rinse stages and in the COT-
TONS and MINIMUM IRON
programmes an extra rinse cycle is in-
troduced.
There are four different settings which
can be programmed to alter the water
intake for the following programmes:
– COTTONS
– MINIMUM IRON
– Quick wash
– Mixed wash
– Silks
The programmed setting is then acti-
vated by pressing the Water plus addi-
tional option button.
60
The settings are as follows:
Setting 1:
an increase in the rinse water level for
the programmes listed.
Setting 2:
an increase in the water level in the
main wash and rinses for the
programmes listed (the washing ma-
chine is delivered with setting 2 pro-
grammed as standard).
Setting 3:
an extra rinse cycle in the COTTONS
and MINIMUM IRON programmes.
Setting 4:
an increase in the water level in the
main wash and rinses for the
programmes listed and also an extra
rinse cycle in the COTTONS and MINI-
MUM IRON programmes. This setting
should be programmed in if laundry is
too hard after drying and if someone in
the household suffers from a detergent
allergy.
Steps A to G on the following page
describe how to programme and store
a setting in memory.