Table of Contents
Advertisement
c.
Release the antenna cables from the retention clips (2) and channel built into the top edge and
right side of the display back cover.
The antenna cables and transceivers are included in the WLAN Antenna Kit, spare part number
792758-001 and WWAN Antenna Kit, spare part number 792757-001.
Reverse this procedure to reassemble and install the display assembly.
Power connector cable
Description
Power connector cable (includes tape)
Before removing the power connector cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the keyboard/top cover (see
5.
Disconnect the battery cable from the system board (see
6.
Remove the display assembly (see
assembly – touch screen models on page
Remove the power connector cable:
Keyboard/top cover on page
Battery on page
Display assembly – non-touch screen models on page
56.
Spare part number
796086-001
29).
41).
Component replacement procedures
48) or
Display
61
Advertisement
Table of Contents
