Recording With This Unit - Panasonic HX-A1M Basic Operating Instructions Manual

Recording with this unit

Record images with this unit.
≥ You can record images even when this unit is not connected to a smartphone.
1
Press the recording mode/Wi-Fi button to switch to the desired
recording mode.
≥ The recording mode changes each time you press the button. The recording
mode lamps will light (or flash).
Motion Picture Recording Mode # Slow Motion Recording Mode # Still Picture
Recording Mode
Recording Mode
Motion Picture
Recording Mode
Slow Motion Recording
Mode
Still Picture Recording
Mode
*1 You need to set [Recording Mode] of the "Image App" to [Loop Recording].
*2 You need to select a setting other than [OFF] for [Interval rec mode] of the "Image App".
2
Press the recording start/stop button.
In Motion Picture Recording Mode/Slow Motion Recording Mode:
The access lamp will light red and recording will start.
≥ If you press the recording start/stop button again, the recording will
stop. While data is being recorded, the access lamp will flash. Do not
remove the microSD card until the access lamp goes off.
In Still Picture Recording Mode:
Recording still pictures.
≥ In [Interval rec mode], the access lamp will light red and recording will
start. If you press the recording start/stop button again, the recording
will stop.
Please refer to the operating instructions (PDF format) for details.
Recording mode
lamp
[Normal Shooting]:
Lit
Recording motion pictures.
[Loop Recording]
No matter how long you record, you can only
Flashing
record motion pictures for the last 1 hour to
microSD card.
[Slow Motion]:
This records motion pictures in slow motion by
Lit
setting a high frame rate (increasing the number
of frames).
Normal still picture recording:
Lit
Recording a still picture.
[Interval rec mode]
Flashing
This is for recording still pictures at a set interval.
Recording method
*1
:
*2
:
A Access lamp

27
(ENG) SQT0886