Panasonic HX-A1M Basic Operating Instructions Manual page 23

4
Attach this unit to the Multi Mount as
shown in the figure.
Attaching this unit to the Multi Mount
≥ Before attaching this unit, fasten the Multi Mount securely with the band and the hook and loop
fastener.
1
While holding the tightening nut A, tighten the
adjustment knob B by rotating it towards LOCK.
2
While holding the adjustment knob B, loosen the
the adjustment belt C until this unit can be passed
through it by rotating the tightening nut A
towards UNLOCK.
3
Pass this unit through the adjustment
belt C so that this unit is in the position
shown in the figure.
4
While holding the adjustment knob B, tighten the
adjustment belt C by rotating the tightening nut A
towards LOCK until this unit is fastened securely.
≥ Adjust the adjustment belt with hands. Do not apply too much
force.
≥ Do not rotate the tightening nut more than necessary after
fastening this unit.
≥ Check the left/right tilt of this unit after fastening it.
≥ To correct the left/right tilt of this unit, loosen the adjustment belt.


LOCK



UNLOCK



LOCK 
23
(ENG) SQT0886