Troubleshooting - Panasonic HX-A1M Basic Operating Instructions Manual

Others

Troubleshooting

∫ It is not a malfunction in following cases
The lens fogs up.
Problem
This unit cannot be turned
on.
This unit does not stay on
long enough.
Battery runs down quickly.
Colour balance of images
is strange when recording
in a place such as a
gymnasium.
Recorded motion pictures
flicker.
Horizontal lines appear in
recorded images.
The Wi-Fi connection is
not possible between this
unit and a smartphone.
The Wi-Fi connection is
disconnected immediately.
Please refer to the operating instructions (PDF format) for details.
≥ This is due to condensation. It is not a malfunction. Please
refer to page 7.
≥ Charge the battery again to ensure it is sufficiently charged.
(l 13)
≥ In cold places, the battery using time becomes shorter.
≥ If the operating time is very short even after the battery has
been recharged sufficiently, the battery has worn out.
≥ In a place with multiple light sources, such as a gymnasium or
a hall, set the [White Balance] setting to [Indoor 2]. If you
cannot record clearly with the [Indoor 2], set it with [Custom].
≥ If you record an image with [1280k720/60fps] or [848k480/
120fps] in [Slow Motion], flickering or horizontal lines may
appear under fluorescent lighting.
≥ Make sure the smartphone is properly connected to this unit
by checking the Wi-Fi settings of the smartphone.
≥ Make sure the SSID and Password have been correctly input.
≥ Make sure the smartphone is not connected to the wireless
access point. If it is connected to the wireless access point,
change the Wi-Fi access point using the smartphone's Wi-Fi
set up.
≥ If there is a setting for avoiding unnecessary connections in
the Wi-Fi setting menu of the Android device, turn it off.
Check points
29
(ENG) SQT0886