Panasonic HX-A1M Basic Operating Instructions Manual page 3

Wearable camera
Hide thumbs Also See for HX-A1M:
Table of Contents

Advertisement

Make sure to use the supplied cable.
Do not extend the cable.
Do not spray insecticides or volatile
chemicals onto this unit.
≥ If this unit is sprayed with such chemicals, its
body may be marred and the surface finish
may peel off.
≥ Do not leave rubber or plastic products in
contact with this unit for a long time.
Cleaning
≥ Before cleaning, pull the USB cable from the
PC, and then wipe this unit with a soft, dry
cloth.
≥ If this unit is very dirty, dip a cloth in water and
squeeze firmly, and then wipe this unit with
the damp cloth. Next, dry this unit with a dry
cloth.
≥ Use of benzine, paint thinner, alcohol, or
dishwashing liquid may alter the camera body
or peel the surface finish. Do not use these
solvents.
≥ When using a chemical dust cloth, follow the
instructions that came with the cloth.
When you are not going to use this unit for
an extended time
≥ Store this unit in a cool place with minimal
humidity, and with a constant temperature
where possible (recommended temperature:
15 oC to 25 oC, recommended humidity:
40%RH to 60%RH).
≥ Always remove the card from this unit.
≥ When storing this unit for an extended time, it
is recommended that you charge it once
every year.
≥ The battery discharges slowly even if this unit
is not used. The remaining battery level will
decrease when this unit is not used for an
extended time.
≥ When storing this unit in a cupboard or
cabinet, it is recommended that you place a
desiccant (silica gel) in with it.
About the battery
The battery used in this unit is a
rechargeable lithium-ion battery. It is
susceptible to humidity and temperature
and the effect increases the more the
temperature rises or falls.
Due to the waterproof, dustproof, and anti-
shock design of this product, it is not
possible to replace the built-in battery.
If the operating time is very short even after
the battery has been recharged, the battery
has worn out.
About the microSD card
When the microSD card is being accessed
(when the access lamp is lit or flashing), do
not perform the following:
j Remove the microSD card
j Turn the unit off
j Insert and remove the USB cable
j Expose the unit to vibrations or shock
≥ Keep the glasscover (night mode),
glasscover (normal shooting), terminal cover
(waterproof) and terminal cover (USB
connection) out of reach of children to
prevent swallowing.
3
(ENG) SQT0886

Advertisement

Table of Contents
loading

Table of Contents