Panasonic HX-A1M Basic Operating Instructions Manual page 31

How to remove the battery
When disposing of the used product, initialise the network settings and erase all data on this unit.
This figure describes the disposal of this unit, it is not instruction for repair. If
disassembled, repair is not possible.
≥ Disassemble after the battery runs out.
≥ If it cannot be removed smoothly, contact Panasonic's Service Centre.
≥ Keep disassembled parts out of reach of children.
1 Remove the terminal cover and
glasscover. (l 7)
2 Remove the three screws shown in
the figure below, and remove the
cover A.
≥ Before removing the screws, peel off the label
on the terminal with a sharp object.
≥ Use a cross-slot screwdriver (commercially
available).
3 Pull out the inner unit.
4 Remove the five screws shown in
the figure below, and remove the
frame B.


5 Remove the lead C from the
holders D.


6 Open the control board E, and lift
up the battery.
7 Pull out the battery connector F
upwards, and remove the battery.

Regarding the handling of used batteries
≥ Insulate the terminals with cellophane tape or
similar.
≥ Do not disassemble.

31
(ENG) SQT0886